null
Schaeffer Mfg Co.

Schaeffer's 108 Break-In Oil SAE 30 (5-Gallons)

SKU:
C-108-5G
MPN:
0108-005
Availability:
Generally ships in 3-5 business days.
Weight:
40.00 LBS
Shipping:
Free Shipping

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 4 - 5 and get 10% off
Buy 6 - 11 and get 12% off
Buy 12 or above and get 14% off
$224.99

Description

Save 10% when you buy 4!

Schaeffer's 108 Break-In Oil SAE 30 is a fully formulated, balanced, high zinc engine oil. This Break-In oil contains 1650-2250ppm of Zinc and 1650-2250ppm of Phosphorus.

It is designed to provide excellent wear control to critical engine parts such as camshafts, lifters, wrist pins, distributor gears, push rods, valve retainers, pistons and pistons rings. The Break-In Oil will allow these engine components to properly seat for maximum protection, performance and increased engine efficiency. Break-In-Oil especially protects flat-tappet camshafts and lifters during break-in and provides optimal ring seal.

Break-In Oil is compatible with diesel, gasoline, ethanol, methanol and high octane racing fuels.

Break-In Oil is formulated with the highest quality solvent refined and severely hydrofinished high viscosity base stocks. With an advanced performance, high zinc and phosphorus, racing formula additive package added to provide the following performance benefits:

  • Quicker, more efficient ring seal
  • Positive compression seal
  • Protection of turbochargers and superchargers from wear and deposits during break-in
  • Significantly less bearing, ring, piston, cylinder and valve-train wear for a more even and efficient seat
  • Excellent film strength - this results in increased protection against wear.
  • Extra zinc anti-wear additives to protect flat-tappet cams from excessive wear

Break-In Oil also contains two proven frictional modifiers Micron Moly® and Schaeffer's own proprietary additive Penetro. These two proven frictional modifiers optimize maximum protection in flat tappet and roller cam engines. Break-In Oil is fully formulated and does not require the use or addition of supplemental engine oil or chemical additives.

(Looking for SAE 40, 50, 10W-30 or 20W-50?  You can use the Micron Moly Product line.)

* Use 132 Moly EP Oil Treatment to pre-lube cams and lifters along with Break-In Oil for maximum flat tappet break-in performance.

 Do you want to find out more about the benefits of using premium Schaeffer's oil? READ THIS!

 For more information about Schaeffer oil go to stores.buy1oils.com OR check out our blog.

 rev 4.6.24

Download Schaeffer MSDS Sheet   Schaeffer Oil Technical DATA

View AllClose