null
lock plus

Schaeffer 0281S-005 Pure Synthetic Heat Transfer Oil (5-Gallons)

Schaeffer Manufacturing Co.
$219.91

Schaeffer's 0281S-005 Pure Synthetic Heat Transfer Oil (5-Gallons) is a non-toxic, non-corrosive, non-fouling synthetic heat transfer fluid. It is recommended for use in either closed system or open system heat transfer applications. Use where a wide temperature range and environmentally safe fluid is required.

Pure Synthetic Heat Transfer Fluid’s fluidity at temperatures below -50F (-46°C) and thermal stability up to 575F (302°C) permits its use over a wide range of conditions. Pure Synthetic Heat Transfer Fluid is not significantly affected by long exposure to elevated temperatures, including transients to 870F (466°C).
Pure Synthetic Heat Transfer Fluid is blended from the finest high quality severely hydro-finished Polyalphaolefin (PAO) synthetic base fluids available.

  • High Viscosity Index 
  • High Thermal and Oxidative Stability 
  • Low Volatility Characteristics – The low volatility of paraffin base oils results in lower makeup requirements.
  • Flash and Fire Points Significantly Above 400F (204°C) and Auto-Ignition Temperature Above 608F (320°C).

Pure Synthetic Heat Transfer Fluids also meets the requirements for an USDA H-1 quality lubricant and the requirements of the United States Code of Federal Regulations 21CFR 178.3570, 178.3620(b), and 573.680 of the United States Food and Drug Administration’s Regulations and can be used as a heat transfer fluid in food, feed, pharmaceutical processing and packaging plants where incidental food contact may occur.

(See also 281 and 281A)

Always consult the owner’s manual and the OEM’s recommendations for the correct fluid recommendations. More information available in technical data download.

For more information about Schaeffer oil go to stores.buy1oils.com

Call (360) 336-2319

Rev 8.20  

Download Schaeffer MSDS Sheet  Schaeffer Oil Technical DATA

Read more

Bulk Pricing:

  • Buy 2 - 2 and get 5% off
  • Buy 3 - 5 and get 10% off
  • Buy 6 - 10 and get 14% off
  • Buy 11 or above and get 18% off
Add to wishlist

Description

Schaeffer's 0281S-005 Pure Synthetic Heat Transfer Oil (5-Gallons) is a non-toxic, non-corrosive, non-fouling synthetic heat transfer fluid. It is recommended for use in either closed system or open system heat transfer applications. Use where a wide temperature range and environmentally safe fluid is required.

Pure Synthetic Heat Transfer Fluid’s fluidity at temperatures below -50F (-46°C) and thermal stability up to 575F (302°C) permits its use over a wide range of conditions. Pure Synthetic Heat Transfer Fluid is not significantly affected by long exposure to elevated temperatures, including transients to 870F (466°C).
Pure Synthetic Heat Transfer Fluid is blended from the finest high quality severely hydro-finished Polyalphaolefin (PAO) synthetic base fluids available.

  • High Viscosity Index 
  • High Thermal and Oxidative Stability 
  • Low Volatility Characteristics – The low volatility of paraffin base oils results in lower makeup requirements.
  • Flash and Fire Points Significantly Above 400F (204°C) and Auto-Ignition Temperature Above 608F (320°C).

Pure Synthetic Heat Transfer Fluids also meets the requirements for an USDA H-1 quality lubricant and the requirements of the United States Code of Federal Regulations 21CFR 178.3570, 178.3620(b), and 573.680 of the United States Food and Drug Administration’s Regulations and can be used as a heat transfer fluid in food, feed, pharmaceutical processing and packaging plants where incidental food contact may occur.

(See also 281 and 281A)

Always consult the owner’s manual and the OEM’s recommendations for the correct fluid recommendations. More information available in technical data download.

For more information about Schaeffer oil go to stores.buy1oils.com

Call (360) 336-2319

Rev 8.20  

Download Schaeffer MSDS Sheet  Schaeffer Oil Technical DATA

Additional info

SKU: H-281S-5G
Width: 13.00
Height: 15.00
Depth: 13.00
Shipping: Calculated at Checkout
Warranty: null