Schaeffer's 238-029 Ultra Supreme Grease NLGI 1, 2 or 3 | 30-TC

Save 10% when you buy 3!

Schaeffer's 238 Ultra Supreme 5% Moly Grease. Choose NLGI #1, #2 or #3 (30-Tubes).  This Grease is a multi-purpose, tacky, para-synthetic, extreme pressure, aluminum complex base grease. It is especially formulated for use in all types of:

• heavy duty automotive,
• construction equipment,
• mining equipment,
• farming,
• industrial equipment,
• pins and bushings,
• fifth wheel applications.

Ultra Supreme is compounded from the finest select polyalphaolefin (PAO) synthetic base fluids and high viscosity index solvent refined 100% paraffin base stocks. A 5% molybdenum disulfide and solid lubricant package allows the Ultra Supreme to act as a "backstop" lubricant when the grease base is either destroyed or wiped away. This solid lubricant film will withstand pressures up to 500,000 pounds per square inch.

• Superior cohesive and adhesive properties.
• Will not wash out, pound out, splatter or squeeze out even under the heaviest loads or vibrations.
• Excellent resistance to water washout and water spray-off.
• Withstands extreme hot and cold temperatures.
• Excellent anti-wear and extreme pressure load carrying properties.
• 100% reversibility. This allows Moly Supreme to retain its grease-like consistency and remain in the bearings during periods of heat, high shock loading, extreme pressure, and severe mechanical action.
• Excellent rust and oxidation inhibiting characteristics.
• A high dropping point.
• Low temperature pumpability characteristics.

Ultra Supreme meets and exceeds the following specifications and manufacturer’s requirements: US Steel 346, 352, 355, 370 371 specifications, Caterpillar MPGM, Caterpillar’s 5% Molybdenum Disulfide Requirement for pin and bushing applications, Komatsu, MIL-G-234C, Case-IH 251H, John Deere, New Holland, Ford M1693A, General Motors, Chrysler, P&H 472B, 472C and 472D, Federal Specification VV-G-632A, MIL-G-4343C, MIL-23549C, DOD-G-24508A (Navy), JIS K2220, DIN 51825, SKF, Fag, INA, Torrington, Timken, Rexnord Link-Belt Bearing Division, Koyo, NTN Bearing, and Roller Bearing Company of America. Ultra Supreme #3 can be used as Chisel Paste. 

Due to its superior cohesive and adhesive properties Ultra Supreme is not recommended for use in passenger car automotive wheel bearings and electric motor bearings.

(P/N's 02381-029, 02382-029, 02383-029)

Do you want to find out more about which Schaeffer grease is right for you? READ THIS!

For more information about Schaeffer oil go to stores.buy1oils.com OR check out our blog.

rev 10.18.24